Initially, sand was used in conducting every blasting operation. Sand was cheap and could be accessed easily therefore it was preferred for use by many companies. However, it became obvious that sand could not find use in every type of application due to its characteristics. Usually, it damaged certain surfaces and it also left behind dirt and marks. Sand was also later known to cause a serious lung problem called silicosis. Therefore, other alternatives had to be invented. When one needs Dry Ice Blasting Service York PA offers the perfect location to visit.
Among the options that were found is dry ice. Dry ice is a very effective cleaning abrasive because it offers several advantages to the user. Dry ice is simply carbon dioxide gas that exists in solid form because it has been condensed and pressurized to very high levels. Another name used to refer to this substance is solid carbon dioxide.
Solid carbon dioxide is cost effective but a very effective method of cleaning a variety of items in industrial applications. During the cleaning process, a jet of air which is pressurized is used in propelling pellets of solid carbon dioxide to the surface which is being cleaned. The air is used as a propulsion and transportation medium. The solid carbon dioxide can be in form of shavings which have been shaved from bigger pieces of solid carbon dioxide or pellets.
There are several qualities that make dry ice the most suitable for utilization in the industry of cleaning. Firstly, it is non-abrasive, non-conductive, and nonflammable. The fact that it is not abrasive means it can be used to clean surfaces minus causing any type of harm. This makes it appropriate for utilization on fragile/delicate surfaces that may be destroyed by abrasive materials.
The quality of being nonflammable makes the pellets suitable for use on surfaces that are likely to produce heat and fire. The pellets cannot catch fire under any circumstances. In fact, carbon dioxide does not support combustion and will therefore put out any fire that may occur in a place. The quality of being non-conductive makes carbon dioxide very suitable for cleaning electronics and electrical equipment.
Solid carbon dioxide is a very poor conductor of heat hence it can be used in cleaning electrical equipment without the threat of electrical shock. Solid carbon dioxide cannot conduct electricity or heat in any form. That makes it to be suitable for cleaning hot surfaces as well as electric equipment.
Solid carbon dioxide is very safe for the environment since it is non-toxic. Usually, the solid used for cleaning sublimes into gas. Therefore, there is no wastewater, solvents, or any other contaminant introduced into the environment. This has rendered this cleaning technique to be labeled as sustainable environmentally. The USDA, EPA, and FDA of the United States have also approved the use of this technique in the food industry.
The carbon dioxide that is used in this process is usually reclaimed from industrial activities that produce the gas as a byproduct. That means that the companies are happy to give the gas away than to go through the turmoil of containing, storing, or disposing it. In effect, this lowers the cost of the process for customers that need this service.
Among the options that were found is dry ice. Dry ice is a very effective cleaning abrasive because it offers several advantages to the user. Dry ice is simply carbon dioxide gas that exists in solid form because it has been condensed and pressurized to very high levels. Another name used to refer to this substance is solid carbon dioxide.
Solid carbon dioxide is cost effective but a very effective method of cleaning a variety of items in industrial applications. During the cleaning process, a jet of air which is pressurized is used in propelling pellets of solid carbon dioxide to the surface which is being cleaned. The air is used as a propulsion and transportation medium. The solid carbon dioxide can be in form of shavings which have been shaved from bigger pieces of solid carbon dioxide or pellets.
There are several qualities that make dry ice the most suitable for utilization in the industry of cleaning. Firstly, it is non-abrasive, non-conductive, and nonflammable. The fact that it is not abrasive means it can be used to clean surfaces minus causing any type of harm. This makes it appropriate for utilization on fragile/delicate surfaces that may be destroyed by abrasive materials.
The quality of being nonflammable makes the pellets suitable for use on surfaces that are likely to produce heat and fire. The pellets cannot catch fire under any circumstances. In fact, carbon dioxide does not support combustion and will therefore put out any fire that may occur in a place. The quality of being non-conductive makes carbon dioxide very suitable for cleaning electronics and electrical equipment.
Solid carbon dioxide is a very poor conductor of heat hence it can be used in cleaning electrical equipment without the threat of electrical shock. Solid carbon dioxide cannot conduct electricity or heat in any form. That makes it to be suitable for cleaning hot surfaces as well as electric equipment.
Solid carbon dioxide is very safe for the environment since it is non-toxic. Usually, the solid used for cleaning sublimes into gas. Therefore, there is no wastewater, solvents, or any other contaminant introduced into the environment. This has rendered this cleaning technique to be labeled as sustainable environmentally. The USDA, EPA, and FDA of the United States have also approved the use of this technique in the food industry.
The carbon dioxide that is used in this process is usually reclaimed from industrial activities that produce the gas as a byproduct. That means that the companies are happy to give the gas away than to go through the turmoil of containing, storing, or disposing it. In effect, this lowers the cost of the process for customers that need this service.
About the Author:
Get a summary of the things to keep in mind when choosing a dry ice blasting service York PA company and more information about a reputable company at http://www.asmenvironmental.com/dry-ice-blasting now.
No comments:
Post a Comment