The risk of injury is an inherent part of most constructions and a lot of heavy industry projects. We can't eliminate risk entirely, but we can reduce the risk and control it using standard procedures and good work practices. Or, we can just accept it as a normal part of doing a job. The question becomes "How much risk are you and your employees willing to accept?" job safety analysis procedures are critical in any business.
As OSHA moves towards an Illness and Injury Prevention Program (I2P2) standard, security managers may be required to better evaluate and complete a thorough review of the workplace. Executing an effective I2P2 can be enhanced by the establishing of a solid analysis process. A comprehensive hazard and risk assessment based on Job risk Analyses can help in setting priorities and the ranking of task, and procedures by loss frequency and prospective severity.
Any operation that who wants to be successful in its safety efforts has a responsibility to ensure that all employees, beginning with top level management, have been effectively educated on how to achieve best the safety objectives that meet the vision and mission that "injuries can be prevented and losses can be controlled." Also, the operation must ensure that each employee understands and can demonstrate knowledge of the specific hazards of their tasks as well as how to protect themselves from those hazards.
Candid and open communications are essential. Employees ought to be free to report problems or perceived issues without fear of reprisal. Besides, the workplace environment must be trusting and open for problems and issues to be discussed. Otherwise, deeper problems with the relationship between operational and safety issues should be addressed.
Workers are very good at spotting hazards, but not as good at mentioning them. Most incident investigations (my opinion) have found that workers in the area knew the hazard existed. Some thought the hazard was normal and some say they just thought the risk was "acceptable." How do we, as managers, get our employees involved and help reduce risk?
The key to success is to incorporate Job Hazard Analysis directly into the safety and risk control training program with employee involvement, and each employee must be trained on the aspects of their job specific task and demonstrate that they know how to protect themselves from recognized hazards if it is to be effective. In a nutshell, if the hazard knowledge has been conveyed, then supervision should be able to verify the employee's newly acquired skills through a demonstration of their knowledge of the safety controls mandated as well as why those controls are needed.
Well-timed responses or feedback to employees about concerns and findings must be planned. As Job risk Analyses, hazards and risk related questions develop, a combination of interviews, meetings and written communications must be promptly sent to the level of authority that can address the potential severity. As high severity issues are recognized, senior decision makers must be informed with immediate controls or even stern decisions taken until controls can be devised.
Training is the transfer of knowledge from one individual (the trainer) to another individual (the trainee) in a way that allows that knowledge be understood and used in the execution of assigned roles and responsibilities and various associated tasks. The Job Hazard evaluation can clarify and deplete underlying conflicts or confusion regards the steps needed for a better workplace
As OSHA moves towards an Illness and Injury Prevention Program (I2P2) standard, security managers may be required to better evaluate and complete a thorough review of the workplace. Executing an effective I2P2 can be enhanced by the establishing of a solid analysis process. A comprehensive hazard and risk assessment based on Job risk Analyses can help in setting priorities and the ranking of task, and procedures by loss frequency and prospective severity.
Any operation that who wants to be successful in its safety efforts has a responsibility to ensure that all employees, beginning with top level management, have been effectively educated on how to achieve best the safety objectives that meet the vision and mission that "injuries can be prevented and losses can be controlled." Also, the operation must ensure that each employee understands and can demonstrate knowledge of the specific hazards of their tasks as well as how to protect themselves from those hazards.
Candid and open communications are essential. Employees ought to be free to report problems or perceived issues without fear of reprisal. Besides, the workplace environment must be trusting and open for problems and issues to be discussed. Otherwise, deeper problems with the relationship between operational and safety issues should be addressed.
Workers are very good at spotting hazards, but not as good at mentioning them. Most incident investigations (my opinion) have found that workers in the area knew the hazard existed. Some thought the hazard was normal and some say they just thought the risk was "acceptable." How do we, as managers, get our employees involved and help reduce risk?
The key to success is to incorporate Job Hazard Analysis directly into the safety and risk control training program with employee involvement, and each employee must be trained on the aspects of their job specific task and demonstrate that they know how to protect themselves from recognized hazards if it is to be effective. In a nutshell, if the hazard knowledge has been conveyed, then supervision should be able to verify the employee's newly acquired skills through a demonstration of their knowledge of the safety controls mandated as well as why those controls are needed.
Well-timed responses or feedback to employees about concerns and findings must be planned. As Job risk Analyses, hazards and risk related questions develop, a combination of interviews, meetings and written communications must be promptly sent to the level of authority that can address the potential severity. As high severity issues are recognized, senior decision makers must be informed with immediate controls or even stern decisions taken until controls can be devised.
Training is the transfer of knowledge from one individual (the trainer) to another individual (the trainee) in a way that allows that knowledge be understood and used in the execution of assigned roles and responsibilities and various associated tasks. The Job Hazard evaluation can clarify and deplete underlying conflicts or confusion regards the steps needed for a better workplace
About the Author:
If you are searching for the facts about job safety analysis procedures, come to our web pages online today. More details are available at http://www.safetypoliciesprocedures.com/contact now.
No comments:
Post a Comment